Sale!

LM35 TO-92-3 Board Mount Temperature Sensors

80.00 68.00

LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy.

As such no extra components required to interface LM35 to ADC as the output of LM35 is linear with 10mv/degree scale. It can be directly interfaced to any 10 or 12 bit ADC. But if you are using an 8-bit ADC like ADC0808 or ADC0804 an amplifier section will be needed if you require to measure 1°C change.

LM35 can also be directly connected to Arduino. The output of LM35 temperature can also be given to comparator circuit and can be used for over temperature indication or by using a simple relay can be used as a temperature controller.


Features:

  1. Calibrated directly in Degree Celsius (Centigrade)
  2. Linear at 10.0 mV/°C scale factor
  3. 0.5°C accuracy guarantee-able (at a25°C)
  4. Rated for full -55°C to a 150°C range
  5. Suitable for remote applications
  6. Low cost due to wafer-level trimming
  7. Operates from 4 to 30 volts
  8. Less than 60 mA current drain
  9. Low self-heating, 0.08°C in still air
  10. Non-linearity only 0.25°C typical
  11. Low impedance output, 0.1Ωfor 1 mA load

5 in stock

Additional information

Weight 0.1 g

Reviews

There are no reviews yet.

Be the first to review “LM35 TO-92-3 Board Mount Temperature Sensors”

Your email address will not be published. Required fields are marked *